The liquid silicone feeder is suitable for different viscosity glues, continuous feeding, and controllable output flow. The vertical silicone machine can meet the requirements of the mixing uniformity of foamed silicone, and the integrated design of the whole machine can realize automatic production. The third color paste pump can be used to produce products of different colors. The vertical silicone machine can be equipped with some molding presses and their molds, without modification, to perfectly realize the vulcanization and molding of liquid silicone products.

The liquid silicone feeder is a high-quality feeding system. The powerful hydraulic drive system is driven from the center and acts on the feed pump, avoiding the lateral forces that increase wear when mechanically coupled. The liquid silicone AB compound is generally delivered to the liquid silicone injection molding machine in a ratio of 1:1. Controlled by on-off contact pressure gauges. The operator can see from a distance whether the machine is working properly. These switch contacts are guaranteed to avoid material shortages or overvoltages.

When the feeder receives the start signal. The silicone is performed in automatic mode, and the material pressure regulator keeps the pressure constant for each silicone cycle. This is especially important when the supply demand is extremely small to ensure that the mold is loaded. The liquid silicone feeder can be equipped with vertical injection/horizontal injection, suitable for producing various general and special products or molds. Suitable for silicone products. Production of baby products, medical supplies, diving supplies and other products. Color paste pumps can be selected according to needs, and products of various colors can be manufactured. The liquid silicone feeder is a high quality feeding system. The powerful hydraulic drive system is centrally driven to avoid lateral forces that increase wear when mechanically coupled. When the feeder receives the start signal. The silica gel is then performed in automatic mode, and the material pressure regulator keeps the pressure constant during each silica gel cycle. This is especially important when the supply demand is extremely small to ensure that the mold is loaded.